WAGO 750-8202/040-001 Manual Download Page 52

Page: 52 / 400

52 Device Description

WAGO I/O SYSTEM 750 XTR

750-8202/040-001 PFC200 2ETH RS TELE XTR

Manual

Version 1.2.0, valid from FW Version 03.01.07(13)

3.9

Approvals

More information about approvals.

Detailed references to the approvals are listed in the document “Overview

Approvals

WAGO I/O SYSTEM 750

”, which you can find via the internet under:

www.wago.com



DOWNLOADS



Documentation



System Description.

The following approvals have been granted to 750-8202/040-001 fieldbus

coupler/controller:

Conformity Marking

UL508

Korea Certification

MSIP-REM-W43-PFC750

The following Ex approvals have been granted to 750-8202/040-001 fieldbus

coupler/controller:

UL 12.12.01 – for Use in Hazardous Locations

Class I, Div2 ABCD T4

TÜV 17 ATEX 193969 X
II 3 G Ex ec IIC T4 Gc

IECEx TUN 16.0046X
Ex ec IIC T4 Gc

The following ship approvals have been granted to 750-8202/040-001 fieldbus

coupler/controller:

ABS (American Bureau of Shipping)

Temperature:

D (cold test with −40

°C/16

Humidity:

Vibration:

B (vibration test with acceleration

amplitude 5.0g)

EMC:

Enclosure:

LR (Lloyd’s Register)

Env. 1, 2, 3, 4

PRS (Polski Rejestr Statków)

Summary of Contents for 750-8202/040-001

















































































































































































































































































































































































































Search results

Summary of Contents for 750-8202/040-001

Reviews:

Related manuals for 750-8202/040-001

Brands by name

Popular brands

WAGO 750-8202/040-001, Manual

Search results

Summary of Contents for 750-8202/040-001

Reviews:

Related manuals for 750-8202/040-001

Brands by name

Popular brands