334 Service
WAGO I/O SYSTEM 750 XTR
750-8202/040-001 PFC200 2ETH RS TELE XTR
Manual
Version 1.2.0, valid from FW Version 03.01.07(13)
11.1.2 Removing the Memory Card
1.
First, remove any seal that may be in place.
2.
Use an actuating tool or a screwdriver to open the transparent cover flap by
flipping it upwards. The point where to position the tool is marked with an
arrow.
3.
To remove the memory card you must first push it slightly into the slot
(push-push mechanism). This releases the mechanical locking mechanism.
4.
As soon as you let go of the memory card, the memory card is pushed out
a bit and you can remove it.
5.
Remove the memory card.
6.
Close the cover flap by flipping it down and pushing it in until it snaps into
place.
