WAGO I/O SYSTEM 750 XTR
Device Description 27
750-8202/040-001 PFC200 2ETH RS TELE XTR
Manual
Version 1.2.0, valid from FW Version 03.01.07(13)
In the controller's initial state, the installed firmware is based on Linux
®
, with
special real-time extensions of the RT-Preempt patch. In addition, the following
application programs are also installed on the controller, along with a number of
different auxiliary programs:
•
a SNMP server/client
•
a Telnet server
•
a FTP server, a FTPS server (explicit connections only)
•
a SSH server/client
•
a Web server
•
a NTP client
•
a BootP and DHCP client
•
a DHCP server
•
a DNS server
•
a CODESYS Runtime Environment (CODESYS 2 or
e!
RUNTIME
,
selectable)
Based on IEC-61131-3 programming, data processing takes place on site in the
controller. The logical process results can be output directly to the actuators or
transmitted via a connected fieldbus to the higher level controller.
Memory card is not included in the scope of delivery!
Note, the controller is delivered without memory card.
To use a memory card, you must order one separately. The controller can also
be operated without memory card expansion, the use of a memory card is
optional.
</dg_
Only use recommended memory cards!
Use only the SD memory cards available from WAGO (item No. 758-879/000-
001 and 758-879/000-2108) as these are suitable for industrial applications
subjected to environmental extremes and for use in this device.
Compatibility with other commercially available storage media cannot be
guaranteed.
