WAGO 750-8202/040-001 Manual Download Page 167

Page: 167 / 400

WAGO I/O SYSTEM 750 XTR

Commissioning 167

750-8202/040-001 PFC200 2ETH RS TELE XTR

Manual

Version 1.2.0, valid from FW Version 03.01.07(13)

7.8.1.31 “Modbus Services Configuration” Page

The settings for various Modbus services are shown on the “Modbus Services

Configuration” page. The groups are only visible if the

RUNTIME

system is

enabled. Otherwise an information text is displayed.

7.8.1.31.1 “Modbus TCP” Group

Table 104: WBM “Modbus Services Configuration” Page – “Modbus TCP” Group

Parameter

Explanation

Service active

Disable or enable the Modbus/TCP service here.

Click the

[Submit]

button to apply the changes. The change is effective

immediately.

7.8.1.31.2 “Modbus UDP” Group

Table 105: WBM “Modbus Configuration Services” Page – “Modbus UDP” Group

Parameter

Explanation

Service active

Disable/enable the Modbus-UDP service here.

Click the

[Submit]

button to apply the changes. The change is effective

immediately.

Summary of Contents for 750-8202/040-001

















































































































































































































































































































































































































Search results

Summary of Contents for 750-8202/040-001

Reviews:

Related manuals for 750-8202/040-001

Brands by name

Popular brands

WAGO 750-8202/040-001, Manual

Search results

Summary of Contents for 750-8202/040-001

Reviews:

Related manuals for 750-8202/040-001

Brands by name

Popular brands