WAGO I/O SYSTEM 750 XTR
Commissioning 227
750-8202/040-001 PFC200 2ETH RS TELE XTR
Manual
Version 1.2.0, valid from FW Version 03.01.07(13)
7.8.1.51 “SNMP” Menu
This menu contains other submenus with the SNMP settings.
Table 197: “SNMP” Menu
Parameters
Explanation
0. Back to …
Back to the higher-level menu
1. General SNMP
Configuration
Opens a submenu with general SNMP settings
2. SNMP v1/v2c Manager
Configuration
Opens a submenu with settings for the SNMP
v1/v2c Manager
3. SNMP v1/v2c Trap
Receiver Configuration
Opens a submenu with settings for the SNMP
v1/v2c trap receivers
4. SNMP v3 Configuration Opens a submenu with settings for the SNMP v3
configuration
5. SNMP firewalling
Opens a submenu with firewall settings for SNMP
6. Secure SNMP firewalling
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press
[Q]
.
7.8.1.51.1 “SNMP” > “General SNMP Configuration” Submenu
This submenu contains the general SNMP settings.
Table 198: “SNMP” > “General SNMP Configuration” Submenu
Parameters
Submenu Item / Explanation
0. Back to …
Back to the higher-level menu
1. SNMP status
Enable or disable the SNMP service.
0. Back to … Back to the higher-level menu
1. Enable
The SNMP service is enabled.
2. Disable
The SNMP service is disabled.
2. Name of device
Enter here the device name (sysName).
3. Description
Enter here the device description (sysDescription).
4. Physical location
Enter here the location of the device (sysLocation).
5. Contact
Enter here the email contact address (sysContact).
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press
[Q]
.
Click
[<OK>]
to apply the entry.
Click
[<Abort>]
to discard the entry.
