WAGO I/O SYSTEM 750 XTR
Device Description 45
750-8202/040-001 PFC200 2ETH RS TELE XTR
Manual
Version 1.2.0, valid from FW Version 03.01.07(13)
3.6
Slot for Memory Card
Figure 18: Slot for SD Memory Card
The slot for the SD memory card is located on the front of the housing. The
memory card is locked in the enclosure by a push/push mechanism. Inserting
and removing the memory card is described in the Section “Service” > “Inserting
and Removing the Memory Card.”
The memory card is protected by a cover flap. The cover cap is sealable.
Memory card is not included in the scope of delivery!
Note, the controller is delivered without memory card.
To use a memory card, you must order one separately. The controller can also
be operated without memory card expansion, the use of a memory card is
optional.
</dg_
Only use recommended memory cards!
Use only the SD memory cards available from WAGO (item No. 758-879/000-
001 and 758-879/000-2108) as these are suitable for industrial applications
subjected to environmental extremes and for use in this device.
Compatibility with other commercially available storage media cannot be
guaranteed.
