Triumph Adler P-3020 MFP, User Manual

Page: 53 / 481

2
Preparation before Use
2-19
7
Finish the installation.
When "Your software is ready to use" appears, you
can use the software. To print a test page, click the
"Print a test page" checkbox and select the machine.
Click [Finish] to exit the wizard.
NOTE:
When you have selected [Device settings] in Windows XP, the dialog box for device setting will appear after
[Finish] is clicked. Configure the settings for options installed on the machine. Device settings can be configured
after the installation is completed. For details, refer to the Device Settings in the
Printing System Driver User
Guide on the DVD.
If a system restart message appears, restart the computer by following the screen prompts. This completes the printer
driver installation procedure.
The TWAIN driver can be installed if the machine and computer are connected via a network.
If you are installing the TWAIN driver, continue by configuring the
Setting TWAIN Driver on 2-26 .
Custom Install
The following procedure is an example for installing the software in Windows 7 using [Custom Install].
1
Insert the DVD.
NOTE:
• Installation on Windows must be done by a user logged on with
administrator privileges.
• If the "Welcome to the Found New Hardware Wizard" dialog
box displays, select [Cancel].
• If the autorun screen is displayed, click [Run setup.exe] .
• If the user account management window appears, click [Yes]
([Allow]).
2
Display the screen.
Click [View License Agreement] and read the
License Agreement.