Triumph Adler P-3020 MFP User Manual Download Page 407

Page: 407 / 481

10-17

Troubleshooting

Rear Cover

Follow the steps below to clear paper jams of the rear cover.

Open the rear cover and remove the jammed paper by
pulling it out.

CAUTION:

The fuser unit inside the machine is hot. Do not

touch it, as it may result in burn injury.

If the paper is jammed inside the fuser unit, open the
fuser cover and remove the paper by pulling it out.

Close the rear cover, and open and close the top cover
to clear the error. The machine warms up and resumes
printing.

Document Processor

Follow the steps below to clear paper jams in the document processor.

Remove all of the originals from the document feed tray.

Open the left cover of the document processor.

Summary of Contents for P-3020 MFP


































































































































































































































































































































































































































































































Search results

Summary of Contents for P-3020 MFP

Reviews:

Related manuals for P-3020 MFP

Brands by name

Popular brands

Triumph Adler P-3020 MFP, User Manual

Search results

Summary of Contents for P-3020 MFP

Reviews:

Related manuals for P-3020 MFP

Brands by name

Popular brands