Triumph Adler P-3020 MFP User Manual Download Page 141

Page: 141 / 481

4-15

Copying Functions

Press the





key to select [Address Book] or

[Address Entry], and then press the

key.

If you select [Address Book], select [Address Book] on
the next screen and press the

key, and then select

the notice destination.

Press [Menu] (the

Right Select

key), select [Detail] on

the next screen and press the

key to view the details

of the selected notice destination.

If you select [Address Entry], enter the address of the
notice destination.

NOTE:

Refer to

Character Entry Method on Appendix-5

for

details on entering characters.

Press the

key.

Completed.

is displayed and the screen returns to the

basic screen for copying.

Press the

Start

key to start copying. Upon completion of

the job, an E-mail notice is sent to the selected
destination.

NOTE:

Press the

Reset

key to reset the settings selected in

Function Menu.

Destination:

*********************

Address Entry

*Address Book

Address Book:

*********************

Maury

Morgan

[ Menu

]

Fiala

Address Entry:

******@abcdefg.jp

ABC

[ Text

]

Summary of Contents for P-3020 MFP


































































































































































































































































































































































































































































































Search results

Summary of Contents for P-3020 MFP

Reviews:

Related manuals for P-3020 MFP

Brands by name

Popular brands

Triumph Adler P-3020 MFP, User Manual

Search results

Summary of Contents for P-3020 MFP

Reviews:

Related manuals for P-3020 MFP

Brands by name

Popular brands