Triumph Adler P-3020 MFP User Manual Download Page 405

Page: 405 / 481

10-15

Troubleshooting

Duplexer

Paper is jammed in the duplexer. Remove the jammed paper using the procedure given below.

Pull the paper cassette all the way out of the machine.

Open the duplexer’s cover in front of the machine and
remove any jammed paper.

Open the duplexer’s cover at the rear of the machine and
remove any jammed paper.

Push the cassette back in securely, and open and close
the front cover to clear the error. The machine warms up
and resumes printing.

Inside the Machine

Pull the paper cassette all the way out of the machine.
Remove any partially fed paper.

Open the front cover, and lift the developer unit together
with the toner container out of the machine.

Summary of Contents for P-3020 MFP


































































































































































































































































































































































































































































































Search results

Summary of Contents for P-3020 MFP

Reviews:

Related manuals for P-3020 MFP

Brands by name

Popular brands

Triumph Adler P-3020 MFP, User Manual

Search results

Summary of Contents for P-3020 MFP

Reviews:

Related manuals for P-3020 MFP

Brands by name

Popular brands