Triumph Adler P-3020 MFP User Manual Download Page 243

Page: 243 / 481

8-37

Default Setting (System Menu)

Press the





key to select [Sleep Rules].

Press the

key. Sleep Rules appears.

Press





key to select the condition to be set.

Press the





key to select [Off] or [On].

Press the

key.

Completed.

is displayed and the

screen returns to the Sleep Rules menu.

Sleep Level (models except for Europe)

There are two sleep modes with different levels of sleep: Quick Recovery and Energy Saver.

Quick Recovery Mode

: The recovery from the sleep mode is faster than when using Energy Saver mode.

Energy Saver Mode

This makes it possible to reduce energy consumption even further than with Quick
Recovery mode.

With Energy Saver mode, you can set whether to enable the Energy Saver mode for each separate function.

NOTE:

For information on the Quick Recovery mode and Energy Saver mode, refer to

Energy Saver Function on

page 2-7

In the Sys. Menu/Count. menu, press the





key to

select [Common Settings].

Press the

key. The Common Settings menu appears.

Press the





key to select [Timer Setting], and press

the

key.

Sleep Rules:

*********************

Card Reader

FAX

[ Exit

]

Network

Network:

*********************

*Off

Sys. Menu/Count.:

System/Network

User/Job Account

*********************

[ Exit

]

Common Settings

Common Settings:

*********************

Default Screen

Sound

[ Exit

]

Language

Summary of Contents for P-3020 MFP


































































































































































































































































































































































































































































































Search results

Summary of Contents for P-3020 MFP

Reviews:

Related manuals for P-3020 MFP

Brands by name

Popular brands

Triumph Adler P-3020 MFP, User Manual

Search results

Summary of Contents for P-3020 MFP

Reviews:

Related manuals for P-3020 MFP

Brands by name

Popular brands