Triumph Adler P-3020 MFP User Manual Download Page 363

Page: 363 / 481

8-157

Default Setting (System Menu)

The System/Network menu appears.

Press the





key to select [Network Setting].

Press the

key. The Network Setting menu appears.

Press the





key to select [Secure Protocol].

Press the

key. Secure Protocol appears.

Press the





key to select [IPP Security].

Press the

key. IPP Security appears.

Press the





key to select [IPP/IPP over SSL] or

[IPPoverSSL only].

Press the

key.

Completed.

is displayed and the

screen returns to the Secure Protocol menu.

HTTP Security

Specify the protocol to be used for HTTP. The default setting is

HTTPS only

Use the procedure below to make the setting.

In the Sys. Menu/Count. menu, press the





key to

select [System/Network], and press the

key.

System/Network:

*********************

I/F Block Set.

Security Level

[ Exit

]

Network Setting

Network Setting:

*********************

Host Name

LAN Interface

[ Exit

]

Secure Protocol

Secure Protocol:

SSL

*********************

HTTP Security

[ Exit

]

IPP Security

IPP Security:

IPP/IPP over SSL

*********************

*IPPoverSSL only

Sys. Menu/Count.:

Report

Counter

*********************

[ Exit

]

System/Network

Summary of Contents for P-3020 MFP


































































































































































































































































































































































































































































































Search results

Summary of Contents for P-3020 MFP

Reviews:

Related manuals for P-3020 MFP

Brands by name

Popular brands

Triumph Adler P-3020 MFP, User Manual

Search results

Summary of Contents for P-3020 MFP

Reviews:

Related manuals for P-3020 MFP

Brands by name

Popular brands