Triumph Adler P-3020 MFP User Manual Download Page 240

Page: 240 / 481

8-34

Default Setting (System Menu)

Press the





key to select [Timer Setting], and press

the

key.

A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the

Right Select

key).

The Timer Settings menu appears.

Press the





key to select [Err. Clear Timer].

Press the

key. Err. Clear Timer appears.

Press the





key to set the Error Clear Timer. Set

the amount of time before clearing errors in seconds.
You cannot use the numeric keys to enter this value.

Press the

key.

Completed.

is displayed and the

screen returns to the Timer Settings menu.

*******************

[ Login

]

Timer Setting:

*********************

PanelReset Timer

Low Power Timer

[ Exit

]

Auto Panel Reset

Err. Clear Timer:

(5 - 495)

******30*

sec.

Summary of Contents for P-3020 MFP


































































































































































































































































































































































































































































































Search results

Summary of Contents for P-3020 MFP

Reviews:

Related manuals for P-3020 MFP

Brands by name

Popular brands

Triumph Adler P-3020 MFP, User Manual

Search results

Summary of Contents for P-3020 MFP

Reviews:

Related manuals for P-3020 MFP

Brands by name

Popular brands