Triumph Adler P-3020 MFP User Manual Download Page 67

Page: 67 / 481

Preparation before Use

2-33

E-mail settings

By configuring the SMTP settings, you can send E-mail notifications on completed jobs.

To use this function, this machine must be connected to a mail server using the SMTP protocol.

In addition, check the following.

•

The network environment used to connect this machine to the mail server
A full-time connection via a LAN is recommended.

•

SMTP settings
Use Embedded Web Server RX to register the IP address or host name of the SMTP server.

•

If limits have been set on the size of E-mail messages, it may not be possible to send very large E-mails.

The procedure for specifying the SMTP settings is explained below.

Access Embedded Web Server RX by referring to

Accessing Embedded Web Server RX on 2-30

From the

Function Settings

menu, click

E-mail

Summary of Contents for P-3020 MFP


































































































































































































































































































































































































































































































Search results

Summary of Contents for P-3020 MFP

Reviews:

Related manuals for P-3020 MFP

Brands by name

Popular brands

Triumph Adler P-3020 MFP, User Manual

Search results

Summary of Contents for P-3020 MFP

Reviews:

Related manuals for P-3020 MFP

Brands by name

Popular brands