Triumph Adler P-3020 MFP User Manual Download Page 319

Page: 319 / 481

8-113

Default Setting (System Menu)

Press the

key. A confirmation screen appears.

The screen shown is the one when Status Page is
selected.

Press [Yes] (the

Left Select

key). The selected report is

output.

Accepted.

is displayed and the screen returns to

the Report Print menu.

NOTE:

When acceptance of jobs is prohibited,

Print, storing functions are restricted now.

is displayed and the

output is canceled.

Service Status Page

More detailed information is available than on the Status Page. Service personnel usually print the service status
pages for maintenance purpose.

Network Status Page

Check the information including network interface firmware version, network address and protocol.

Use the procedure below to print a Service Status / Network Status.

In the Sys. Menu/Count. menu, press the





key to

select [Adjust/Maint.].

Press the

key. The Adjust/Maint. menu appears.

Print.
Are you sure?

Status Page

[

Yes

] [

]

Sys. Menu/Count.:

Document Box

;

Edit Destination

*********************

[ Exit

]

Adjust/Maint.

Adjust/Maint.:

*********************

Send/Box Density

Backgrnd Density

[ Exit

]

Copy Denst. Adj.

Summary of Contents for P-3020 MFP


































































































































































































































































































































































































































































































Search results

Summary of Contents for P-3020 MFP

Reviews:

Related manuals for P-3020 MFP

Brands by name

Popular brands

Triumph Adler P-3020 MFP, User Manual

Search results

Summary of Contents for P-3020 MFP

Reviews:

Related manuals for P-3020 MFP

Brands by name

Popular brands