Triumph Adler P-3020 MFP User Manual Download Page 155

Page: 155 / 481

5-9

Sending Functions

File Format

Select the file format of the image to send.
The table below lists the file formats and their details.

Use the procedure below to select the file format for transmission.

Press the

Send

key.

Place the original.

Press the

Function Menu

key. Function Menu appears.

Press the





key to select [File Format].

Press the

key. File Format appears.

Press the





key to select the file format from [PDF],

[TIFF], [XPS] or [JPEG].

If Full Color or Grayscale has been selected for the color
mode for scanning, press [Detail] (the

Right Select

key)

and select the image quality.

If you selected PDF, you can specify PDF/A settings.

Press the

key.

Completed.

is displayed and the screen returns to the

basic screen for sending.

Specify the destination, and press the

Start

key to start

sending.

NOTE:

Press the

Reset

key to reset the settings selected in

Function Menu.

File Format

Adjustable range of image

quality

Color mode

PDF*

The file format can be set to [PDF/A-1a] or [PDF/A-1b].

1 Low Quality (High Comp.) to 5
High Quality (Low Comp.)

Auto Color (Color/Grayscale), Auto Color (Color/Black
and White), Full Color, Grayscale, Black and White

TIFF

1 Low Quality (High Comp.) to 5
High Quality (Low Comp.)

Auto Color (Color/Grayscale), Auto Color (Color/Black
and White), Full Color, Grayscale, Black and White

XPS

1 Low Quality (High Comp.) to 5
High Quality (Low Comp.)

Auto Color (Color/Grayscale), Auto Color (Color/Black
and White), Full Color, Grayscale, Black and White

JPEG

1 Low Quality (High Comp.) to 5
High Quality (Low Comp.)

Auto Color (Color/Grayscale), Full Color, Grayscale

Function Menu:

*********************

Original Size

Original Image

[ Exit

]

Color Selection

File Format:

*********************

TIFF

XPS

[ Detail ]

*PDF

Summary of Contents for P-3020 MFP


































































































































































































































































































































































































































































































Search results

Summary of Contents for P-3020 MFP

Reviews:

Related manuals for P-3020 MFP

Brands by name

Popular brands

Triumph Adler P-3020 MFP, User Manual

Search results

Summary of Contents for P-3020 MFP

Reviews:

Related manuals for P-3020 MFP

Brands by name

Popular brands