Triumph Adler P-3020 MFP User Manual Download Page 326

Page: 326 / 481

8-120

Default Setting (System Menu)

Press the

key. The Adjust/Maint. menu appears.

Press the





key to select [Correct. Bk Line].

Press the

key. Correct. Bk Line appears.

Press the





key to select [Off], [On(Low)] or

[On(High)].

Press the

key.

Completed.

is displayed and the

screen returns to the Adjust/Maint. menu.

New Developer

When the printing is too light or incomplete, even though there is enough toner, refresh the developer.

In the Sys. Menu/Count. menu, press the





key to

select [Adjust/Maint.].

Press the

key. The Adjust/Maint. menu appears.

Press the





key to select [Service Setting].

Press the

key. The Service Setting menu appears.

Press the





key to select [New Developer].

Adjust/Maint.:

*********************

Send/Box Density

Backgrnd Density

[ Exit

]

Copy Denst. Adj.

Correct. Bk Line:

*********************

On(Low)

On(High)

*Off

Sys. Menu/Count.:

Document Box

;

Edit Destination

*********************

[ Exit

]

Adjust/Maint.

Adjust/Maint.:

*********************

Send/Box Density

Backgrnd Density

[ Exit

]

Copy Denst. Adj.

Service Setting:

*********************

Network Status

New Developer

[ Exit

]

Service Status

Summary of Contents for P-3020 MFP


































































































































































































































































































































































































































































































Search results

Summary of Contents for P-3020 MFP

Reviews:

Related manuals for P-3020 MFP

Brands by name

Popular brands

Triumph Adler P-3020 MFP, User Manual

Search results

Summary of Contents for P-3020 MFP

Reviews:

Related manuals for P-3020 MFP

Brands by name

Popular brands