Triumph Adler P-3020 MFP User Manual Download Page 424

Page: 424 / 481

11-16

Management

The User/Job Account menu appears.

Press the





key to select [Job Account. Set.].

Press the

key. The Job Account. Set. menu appears.

Press the





key to select [Job Accounting].

Press the

key. Job Accounting appears.

Press the





key to select [On]. To disable job

accounting, select [Off].

Press the

key.

Completed.

is displayed and the screen returns to the

Job Account. Set. menu.

NOTE:

When the display returns to the System Menu

default screen, logout is automatically executed and the
screen to enter the Account ID appears. To continue the
operation, enter the Account ID.

User/Job Account:

User Login Set.

*********************

Unknown ID Job

[ Exit

]

Job Account.Set.

Job Account.Set.:

*********************

AccountingAccess

Account. Report

[ Exit

]

Job Accounting

Job Accounting:

*********************

*Off

Summary of Contents for P-3020 MFP


































































































































































































































































































































































































































































































Search results

Summary of Contents for P-3020 MFP

Reviews:

Related manuals for P-3020 MFP

Brands by name

Popular brands

Triumph Adler P-3020 MFP, User Manual

Search results

Summary of Contents for P-3020 MFP

Reviews:

Related manuals for P-3020 MFP

Brands by name

Popular brands