Triumph Adler P-3020 MFP User Manual Download Page 59

Page: 59 / 481

Preparation before Use

2-25

Uninstalling the Software

Perform the following procedure to delete the Software from your computer.

NOTE:

Uninstallation on Windows must be done by a user logged on with administrator privileges.

Click

Start

button on the Windows and then select

All

Programs

(name of offer company)

, and

(name of

product)

to display the Uninstall Wizard.

Place a check in the check box of the software to be
deleted.

Click

Uninstall

If a system restart message appears, restart the
computer by following the screen prompts. This
completes the software uninstallation procedure.

NOTE:

The software can also be uninstalled using the

Product Library.
In the Product Library installation screen, click [Uninstall],
and follow the on-screen instructions to uninstall the
software.

Summary of Contents for P-3020 MFP


































































































































































































































































































































































































































































































Search results

Summary of Contents for P-3020 MFP

Reviews:

Related manuals for P-3020 MFP

Brands by name

Popular brands

Triumph Adler P-3020 MFP, User Manual

Search results

Summary of Contents for P-3020 MFP

Reviews:

Related manuals for P-3020 MFP

Brands by name

Popular brands