Triumph Adler P-3020 MFP User Manual Download Page 430

Page: 430 / 481

11-22

Management

Press the

key. The Job Account. Set. menu appears.

Press the





key to select [Account. List].

Press the

key. Account. List appears.

The procedure differs depending on the details to be edited.

Changing account information

Press the





key to select the account whose

information you want to change, and then press the

key.

Press the





key to select the item you want to

change, press [Edit] (the

Right Select

key), change

account information and restriction of use, and then
press the

key.

NOTE:

Activate or deactivate restriction. Refer to

Restricting the Use of the Machine on page 11-25

Repeat step 2 to change items as necessary.

After completing changing the account information,
press the

key again. A confirmation screen appears.

Press [Yes] (the

Left Select

key). The account

information is changed.

Registered.

is displayed and the

screen returns to Account. List.

Job Account.Set.:

*********************

AccountingAccess

Account. Report

[ Exit

]

Job Accounting

Account. List:

*********************

GUI Design

RD Center

[ Menu

]

UI R&D DEP.

Account. List:

UI R&D DEP.

*********************

RD Center

[ Menu

]

GUI Design

Detail:

Account Name:

1/6

GUI Design

[ Edit

]

Overwrite.
Are you sure?

GUI DESIGN

[

Yes

] [

]

Summary of Contents for P-3020 MFP


































































































































































































































































































































































































































































































Search results

Summary of Contents for P-3020 MFP

Reviews:

Related manuals for P-3020 MFP

Brands by name

Popular brands

Triumph Adler P-3020 MFP, User Manual

Search results

Summary of Contents for P-3020 MFP

Reviews:

Related manuals for P-3020 MFP

Brands by name

Popular brands