Triumph Adler P-3020 MFP User Manual Download Page 204

Page: 204 / 481

7-20

Status / Job Cancel

Device/Communication

Configure the devices/lines installed or connected to this machine or check their status. You can also control devices
depending on their status.

Check of Device Status

Press the

Status

Job Cancel

key. The Status menu

appears.

Press the





key to select [Scanner], [Printer] or

[FAX].

Press the

key. This displays the status of the device

selected in step 2.

Press the

key. The screen returns to the Status

menu.

The items you can check are described below.

Scanner

The information (scanning, pausing, etc.) is displayed.

Printer

Information (waiting, printing, etc.) is displayed.

FAX

The information (sending, waiting, etc.) is displayed.

Status:

Store Job Log

*********************

Printer

[ Pause ]

Scanner

Scanner:

Ready.

Printer:

Processing.

FAX:

Ready.

[

Log

]

Summary of Contents for P-3020 MFP


































































































































































































































































































































































































































































































Search results

Summary of Contents for P-3020 MFP

Reviews:

Related manuals for P-3020 MFP

Brands by name

Popular brands

Triumph Adler P-3020 MFP, User Manual

Search results

Summary of Contents for P-3020 MFP

Reviews:

Related manuals for P-3020 MFP

Brands by name

Popular brands