Triumph Adler P-3020 MFP User Manual Download Page 443

Page: 443 / 481

11-35

Management

Press the

key. A menu for the account appears.

Press the





key to select the function of which you

want to check counts, and then press the

key.

If you select [Printed Pages], select the item for which

you want to check printed page counts, and then press

the

key. Press the





key to switch the counted

items.

If you select [Scanned Pages], press the





key to

switch the counted items.

If the number of output sheets is restricted by an account
management function, the upper limit on the number of
output sheets is also displayed.

After confirming the content, press the

key. The

screen returns to the menu for the account.

To reset the counter, press the





key to select

[Counter Reset].

Press the

key. A confirmation screen appears.

Press [Yes] (the

Left Select

key). The counter is reset.

Completed.

is displayed and the screen returns to the

menu for the account.

GUI DESIGN:

*********************

Scanned Pages

FAX TX Pages

[ Exit

]

Printed Pages

Scanned Pages:

Copy:

1/4

1234567
Limit:1234567

GUI DESIGN:

Printed Pages

Scanned Pages

*********************

[ Exit

]

Counter Reset

Reset counter.
Are you sure?

GUI DESIGN

[

Yes

] [

]

Summary of Contents for P-3020 MFP


































































































































































































































































































































































































































































































Search results

Summary of Contents for P-3020 MFP

Reviews:

Related manuals for P-3020 MFP

Brands by name

Popular brands

Triumph Adler P-3020 MFP, User Manual

Search results

Summary of Contents for P-3020 MFP

Reviews:

Related manuals for P-3020 MFP

Brands by name

Popular brands