Triumph Adler P-3020 MFP User Manual Download Page 201

Page: 201 / 481

7-17

Status / Job Cancel

IMPORTANT:

If no destination is registered, Enter

destination is displayed. Refer to

Registering Destination on

page 7-15

and register the desired destination

Press [Yes] (the

Left Select

key). Accepted. is displayed

and the job log is sent to the registered destination
before the screen returns to the Job Log History menu.

Setting E-mail Subject

Set the subject automatically entered when sending job log histories by e-mail.

Use the procedure below to set the subject.

In the Job Log History menu, press the





key to

select [Subject].

Press the

key. Subject appears.

Enter the e-mail subject.

NOTE:

Refer to

Character Entry Method on Appendix-5

for

details on entering characters.

Press the

key.

Completed

. is displayed and the

screen returns to the Job Log History menu.

Enter destination.

Job Log History:

Send History

Destination

*********************

[ Exit

]

Subject

Subject:

%printer

ABC

[ Text

]

Summary of Contents for P-3020 MFP


































































































































































































































































































































































































































































































Search results

Summary of Contents for P-3020 MFP

Reviews:

Related manuals for P-3020 MFP

Brands by name

Popular brands

Triumph Adler P-3020 MFP, User Manual

Search results

Summary of Contents for P-3020 MFP

Reviews:

Related manuals for P-3020 MFP

Brands by name

Popular brands