Triumph Adler P-3020 MFP User Manual Download Page 285

Page: 285 / 481

8-79

Default Setting (System Menu)

Copy Settings

The following settings are available for copying functions.

• Paper Selection …8-79
• Auto Paper Selection …8-80
• Auto % Priority …8-81
• Select Key Set …8-82

NOTE:

If user login administration is enabled, you can only change the settings by logging in with administrator

privileges.

Paper Selection

Set the default paper selection. The table below shows the available settings.

Use the procedure below to set the default paper selection.

In the Sys. Menu/Count. menu, press the





key to

select [Copy].

Press the

key. The Copy menu appears.

Press the





key to select [Paper Selection].

Press the

key. Paper Selection appears.

Press the





key to select [Auto] or [Def. Paper

Source].

Press the

key.

Completed.

is displayed and the

screen returns to the Copy menu.

Item

Description

Auto

Automatically select the cassette containing
paper in the same size as originals.

Def. PaperSource

Select paper source set by Default Paper
Source (refer to

page 8-20

Sys. Menu/Count.:

System/Network

User/Job Account

*********************

[ Exit

]

Common Settings

Copy:

*********************

AutoPaperSelect.

Auto % Priority

[ Exit

]

Paper Selection

Paper Selection:

*********************

Def. PaperSource

*Auto

Summary of Contents for P-3020 MFP


































































































































































































































































































































































































































































































Search results

Summary of Contents for P-3020 MFP

Reviews:

Related manuals for P-3020 MFP

Brands by name

Popular brands

Triumph Adler P-3020 MFP, User Manual

Search results

Summary of Contents for P-3020 MFP

Reviews:

Related manuals for P-3020 MFP

Brands by name

Popular brands