Triumph Adler P-3020 MFP User Manual Download Page 418

Page: 418 / 481

11-10

Management

Press the

key. Local User List appears.

The procedure differs depending on the details to be
edited.

Changing user information

Press the





key to select the user whose

information you want to change, and then press the

key.

In the same fashion as registering a new user, press the





key to select the desired item, press [Edit] (the

Right Select

key), change information, and then press

the

key.

Repeat step 2 to change items as necessary.

After completing changing the user information, press
the

key again.

The overwrite confirmation screen appears.

Press [Yes] (the

Left Select

key). The user information

is changed and the screen returns to Local User List.

Deleting a user

Press the





key to select the user you want to

delete, and then press [Menu] (the

Right Select

key).

Press the





key to select [Delete] and then press

the

key.

Local User List:

*********************

Admin

User1

[ Menu

]

DeviceAdmin

Local User List:

DeviceAdmin

*********************

User1

[ Menu

]

Admin

Detail:

User Name:

1/6

User1

[ Edit

]

Local User List:

DeviceAdmin

*********************

User1

[ Menu

]

Admin

Menu:

Detail/Edit

*********************

Add User

Delete

Summary of Contents for P-3020 MFP


































































































































































































































































































































































































































































































Search results

Summary of Contents for P-3020 MFP

Reviews:

Related manuals for P-3020 MFP

Brands by name

Popular brands

Triumph Adler P-3020 MFP, User Manual

Search results

Summary of Contents for P-3020 MFP

Reviews:

Related manuals for P-3020 MFP

Brands by name

Popular brands