Toshiba GRZ100 B Series Instruction Manual Download Page 224

Page: 224 / 447

⎯

223

⎯

6 F 2 S 0 8 4 6

6.4 Hardware

Tests

The tests can be performed without external wiring, but a DC power supply and an AC voltage and
current source are required.

6.4.1 User

Interfaces

This test ensures that the LCD, LEDs and keys function correctly.

LCD display

•

Apply the rated DC voltage and check that the LCD is off.

Note:

If there is a failure, the LCD displays the "Auto-supervision" screen when the DC voltage is

applied.

•

Press

the RESET key for 1 second when the LCD is off, and check that black dots appear on

the whole screen.

LED display

•

Apply the rated DC voltage and check that the "IN SERVICE" LED is lit in green.

•

Press

the RESET key for 1 second when the LCD is off, and check that seven LEDs under

the "IN SERVICE" LED and two LEDs for monitoring jacks A and B are lit in red.

VIEW and RESET keys

•

Press

the VIEW key when the LCD is off and check that the "Metering" screen is displayed

on the LCD.

•

Press

the RESET key and check that the LCD turns off.

Keypad

•

Press any key on the keypad when the LCD is off and check that the LCD displays the

"MENU" screen. Press the END key to turn off the LCD.

•

Repeat this for all keys.

Summary of Contents for GRZ100 B Series































































































































































































































































































































































































































































Search results

Summary of Contents for GRZ100 B Series

Reviews:

Toshiba GRZ100 B Series, Instruction Manual, Page: 224 / 447

Search results

Summary of Contents for GRZ100 B Series

Reviews: