Toshiba GRZ100 B Series, Instruction Manual

Page: 188 / 447

⎯
187
⎯
6 F 2 S 0 8 4 6
／２ Ｒｅｌａｙ ｖｅｒｓｉｏｎ ３／ ６
Ｒｅｌａｙ ｔｙｐｅ： ＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊
Ｓｅｒｉａｌ Ｎｏ．： ＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊
Ｍａｉｎ ｓｏｆｔｗａｒｅ： ＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊
ＦＤ ｓｏｆｔｗａｒｅ： ＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊
ＰＬＣ ｄａｔａ： ＊＊＊＊＊＊＊＊＊＊＊＊（＊＊＊＊＊＊＊＊）
ＩＥＣ１０３ ｄａｔａ： ＊＊＊＊＊＊＊＊＊＊＊＊（＊＊＊＊＊＊＊＊）
4.2.5.2 Settings
The "Description", "Comm.", "Record", "Status", "Protection", "Binary input", "Binary output"
and "LED" screens display the current settings input using the "Setting (change)" sub-menu.
4.2.6 Changing the Settings
The "Setting (change)" sub-menu is used to make or change settings for the following items:
Password
Description
Address in the RSM or IEC60870-5-103 communication
Recording
Status
Protection
Binary
input
Binary output
LED
All of the above settings except the password can be seen using the "Setting (view)" sub-menu.
4.2.6.1 Setting Method
There are three setting methods as follows.
- To enter a selective number
- To enter numerical values
- To enter a text string
To enter a selected number
If a screen as shown below is displayed, perform the setting as follows.
The number to the left of the cursor shows the current setting or default setting set at shipment. The
cursor can be moved to upper or lower lines within the screen by pressing the and keys. If
setting (change) is not required, skip the line with the and keys.
/ 3 M e t e r i n g 3 /3
D i s p l a y v a l u e 1 = P r i m a r y 2 = S e c o n r y d a 1
P o w e r (
C u r r e n t
P / Q ) 1 = S e n d
1 = L a g 2 = R e c e i v e
2 = L e a d
1
1
•
Move the cursor to a setting line.
•
Enter the selected number. (Numbers other than those displayed cannot be entered.)
•
Press the ENTER key to confirm the entry and the cursor will move to the next line below.