Terumo TERUFUSION TE-SS830P Instruction Manual Download Page 72

Page: 72 / 164

Other Operation Procedures

Start switch

Operation indicator (green flashing)

10) Check the flow rate setting and press the Start switch to

start solution delivery.

Notes

•  The operation indicator flashes green.
•  The volume delivered increases.
•  Even after the setting is completed, the TCI mode select screen appears when the

power is turned off and on again.

• The amount and solution are re-set when the drug library has been changed or the

power is turned off.

• The set weight is re-set when the power is turned off.
• Change the dose mode from mL/h to another mode in drug library during solution

delivery.

Summary of Contents for TERUFUSION TE-SS830P





































































































































































Search results

Summary of Contents for TERUFUSION TE-SS830P

Reviews:

Related manuals for TERUFUSION TE-SS830P

Brands by name

Popular brands

Terumo TERUFUSION TE-SS830P, Instruction Manual

Search results

Summary of Contents for TERUFUSION TE-SS830P

Reviews:

Related manuals for TERUFUSION TE-SS830P

Brands by name

Popular brands