Terumo TERUFUSION TE-SS830P Instruction Manual Download Page 29 | Manualshive

Page: 29 / 164

background image

29

Preparation

Connecting to AC Power

AC power cable

1)

Firmly connect the AC power cable (included) to the AC
inlet.

2)

Connect the plug to an AC power source with an earth
connection.

Note

• If an AC power cable is not included with the pump unit, please contact

TERUMO trained service technicians to receive the cable suited for your
region.

AC icon

Battery
icon

Versions of drug library and TCI, and profile
name

Checks

• The AC icon and battery icon should be displayed on the LCD.
• The LCD should show the versions of the drug library and TCI, and the profile

name which is set by performing the procedure in “Profile” (page 112).

Notes

• Even if the power is off, if the AC power has been supplied, the AC icon is displayed.
• The battery can be charged even if the power is off. The battery icon

(charging) is displayed. There may be cases where the

remaining battery level and

(battery failure) flash alternately every other second when there is a sub-battery failure or low

battery.

• If the AC power cable is disconnected or connected with power turned on, the buzzer sounds (Default setting: 0 (very low)). For

the changing sound volume, see page 105.

• If the AC power cable is disconnected with power turned on, the LCD becomes dim (2 levels of brightness setting). When the AC

power cable is reconnected, the previous brightness is restored.

Cautions

• Please ensure AC inlet and all connections are clean and dry prior to use. If moisture is present, make sure that the power

is turned off and the AC power cable is removed from both main unit and AC power source, and then thoroughly wipe with
a dry cloth.

• Use the AC power cable included and connect to an earthed AC power source.
• Use an earthed AC power supply for normal use. The internal battery is an auxiliary power source for when the AC power

supply is not adequately available during transportation, power failure, etc.

• This product should only be used with a sufficient power supply. If the power supply is not sufficient, the internal battery

will be used for the operation, which may result in no power supply in an emergency situation.

«
...
27
28
29
30
31
...
»

Summary of Contents for TERUFUSION TE-SS830P





































































































































































Reviews:

No comments

Related manuals for TERUFUSION TE-SS830P

Brand: Febco Pages: 12

Brand: Yetter Pages: 16

Brand: XTA Pages: 29

Brand: vc999 Pages: 59

Brand: Qtx Pages: 3

Brand: Saferoad Pages: 24

Brand: DAKO Pages: 25

Brand: 3M ESPE Pages: 50

Brand: VACGEN Pages: 13

Brand: h/p/cosmos Pages: 81

Brand: Ransomes Pages: 282

Ransomes HR 6010

Brand: Jacobsen Pages: 10

Brand: ParaBody Pages: 3

Brand: Valiani Pages: 66

QNET Physics and Dynamics

Brand: Quanser Pages: 4

Brand: RBC Bioscience Pages: 24

Brand: S&C Pages: 16

Brand: S&C Pages: 23

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands