Terumo TERUFUSION TE-SS830P Instruction Manual Download Page 142

Page: 142 / 164

142

Troubleshooting



Nearly Empty alarm

Occurrence

Cause

Action

• LCD: The Nearly Empty alarm

display lights up yellow.

• Operation indicator: Flashes

green (during solution delivery)
or off (stopped).

• Buzzer: Activates.
• Pump: No change to the

status.

• The quantity of the drug

solution is low.

• If you want to continue the solution delivery, replace the

syringe. (See page 62.)



Re-alarm

Occurrence

Cause

Action

• LCD: The respective alarm

displays flash/light up (the
flashing/light up colours are
the same as those at the
respective alarms).

• Operation indicator: Same as

for when the alarms are first
activated.

• Buzzer: Activates.
• Pump: No change to the

status.

• Operation was not started

within 2 minutes after the
alarm was muted.

• Follow the corrective action of each alarm.

Summary of Contents for TERUFUSION TE-SS830P





































































































































































Search results

Summary of Contents for TERUFUSION TE-SS830P

Reviews:

Related manuals for TERUFUSION TE-SS830P

Brands by name

Popular brands

Terumo TERUFUSION TE-SS830P, Instruction Manual

Search results

Summary of Contents for TERUFUSION TE-SS830P

Reviews:

Related manuals for TERUFUSION TE-SS830P

Brands by name

Popular brands