Terumo TERUFUSION TE-SS830P Instruction Manual Download Page 130

Page: 130 / 164

130

After Use

Cleaning the pole clamp

Detach the pole clamp from the pump, and wipe with
a damp (not wet) soft cloth.
* Do not use ethanol to disinfect the rubber cover

and the sliding sites as indicated by

■

Caution

• Do not soak the pole clamp in water to clean it.

• Pole clamp
(screw

type)

• TERUFUSION
One Touch Pole Clamp
(Optional

accessory)

Cleaning the clamp

Wipe with a cotton swab or
damp cloth (not wet).

Cleaning the flange slit and the

Holding flange.

Wipe with a damp (not wet) soft cloth.

Cleaning the rubber protector and

around the rubber protector

Wipe with a damp (not wet) soft cloth.

Rubber cover

Sliding sites

Summary of Contents for TERUFUSION TE-SS830P





































































































































































Search results

Summary of Contents for TERUFUSION TE-SS830P

Reviews:

Related manuals for TERUFUSION TE-SS830P

Brands by name

Popular brands

Terumo TERUFUSION TE-SS830P, Instruction Manual

Search results

Summary of Contents for TERUFUSION TE-SS830P

Reviews:

Related manuals for TERUFUSION TE-SS830P

Brands by name

Popular brands