Terumo TERUFUSION TE-SS830P Instruction Manual Download Page 49

Page: 49 / 164

Operation Procedure

Turning the Power Off

Power switch

3 seconds

or more

•

When the operation ends, press and hold the Power switch
for 3 seconds or more to turn the power off.

Notes

• While holding the Power switch, the power off buzzer sounds, then the LCD displays

count-down arrows and turns off.

• If the Power switch is pressed and held without ending the TCI mode, a buzzer

sounds indicating that the TCI mode is in use. The buzzer continues to sound for
approx. 3 seconds until the power is turned off.

Warning

• While in the TCI mode, never inject the drug to the same patient again after completion. Doing so may result in an

overdose.

Caution

• Do not turn off the power while the TCI mode is in use; otherwise, all important information on the current TCI mode, such

as the predicted concentration, will be erased.

Summary of Contents for TERUFUSION TE-SS830P





































































































































































Search results

Summary of Contents for TERUFUSION TE-SS830P

Reviews:

Related manuals for TERUFUSION TE-SS830P

Brands by name

Popular brands

Terumo TERUFUSION TE-SS830P, Instruction Manual

Search results

Summary of Contents for TERUFUSION TE-SS830P

Reviews:

Related manuals for TERUFUSION TE-SS830P

Brands by name

Popular brands