manualshive.com logo in svg

Terumo TERUFUSION TE-SS830P, Instruction Manual, Page: 113 / 164

Share
Download
Terumo TERUFUSION TE-SS830P Instruction Manual Download Page 113

113

Changing Settings on the Menu

Display select switch

Dial

4) 

Turn the Dial or press the Display select switch to select a 
profile.

Note

•  Turning the Dial or pressing the Display select switch moves the white frame.

Confirmation
switch

5) 

Press the Confirmation switch to confirm the selection.

Check

 

•  In “Drug library”, only the drugs set in the selected profile are available. 

(See page 66).

Note

•  See the dedicated editing software (TERUFUSION Drug Library Manager or 

TERUFUSION Software Package) for profile setting and registration of each drug.

Display 
select switch

2 seconds

or more

6) 

Press and hold the Display select switch for 2 seconds or 
more to return to the flow rate screen.

Note

•  When the AC power has been supplied, the selected profile will be displayed on 

the LCD after turning off the power.

Summary of Contents for TERUFUSION TE-SS830P





































































































































































Reviews:

No comments