Terumo TERUFUSION TE-SS830P Instruction Manual Download Page 14

Page: 14 / 164

Parts Description



Sensor icon display

Syringe Displacement icon

Displays when a syringe displacement is detected.

Nearly Empty icon

Displays when the syringe is detected to be nearly empty.

Occlusion icon

Displays when an occlusion is detected.

Slider Displacement icon

Displays when a plunger displacement or slider displacement is detected.

Note

• Nearly Empty icon and Occlusion icon are displayed when Syringe Empty occurs. (See page 137.)



Tab display

* A selected item that can be entered is displayed in dark blue.

Flow rate tab

Used for setting the flow rate.

Dose rate tab

Used for setting the dose rate when the library or the weight mode is selected.

Volume delivery clear tab

Used for clearing volume delivery.

Info tab

Displays the setting information (unit, weight, drug amount, solution amount, etc.).

Hands On Bolus tab

Used for setting the Hands On Bolus function.

Hands Free Bolus tab

Used for setting the Hands Free Bolus function.



Ready icon

Start up icon

Displays when solution delivery is ready to start.

Ready for bolus icon

Displays when the pump is ready to start bolus.

Summary of Contents for TERUFUSION TE-SS830P





































































































































































Search results

Summary of Contents for TERUFUSION TE-SS830P

Reviews:

Terumo TERUFUSION TE-SS830P, Instruction Manual, Page: 14 / 164

Search results

Summary of Contents for TERUFUSION TE-SS830P

Reviews: