Technogym BIOSTRENGTH LINE, Service Maintenance Manual

Page: 631 / 646

BIOSTRENGTH LINE: Service & Maintenance manual - rev. 2.1
Page 9.23
9.6.4. N
UMBER OF RELAY SWITCHING CYCLES TO MOVE THE WEIGHT STACK
MOTOR DOWNWARD
The number of times the weight stack motor interface board relays have switched in order to move
the motor downward.
W E I G H T R E L A Y D O W N
C Y C L E S : X X X X X X X X X
Change the value shown or press
ENTER to continue.
9.6.5. N
UMBER OF FAIL SIGNALS PRODUCED BY THE WEIGHT STACK MOTOR
INTERFACE BOARD
The number of alarm signals produced by the weight stack motor interface board.
T O T A L F A I L W E I G H T
N : X X X X X X X X X
Change the value shown or press
ENTER to continue.
9.6.6. S
EAT MOTOR RUNNING TIME
This parameter does not appear for Abdominal Crunch and Lower Back.
This is the total number of seconds for which the seat motor has been used.
M O T O R S E A T O N
S E C . X X X X X X X X X
Change the value shown or press
ENTER to continue.
9.6.7. S
EAT MOTOR TEST CYCLES
This parameter does not appear for Abdominal Crunch and Lower Back.
The number of cycles performed by the seat motor during the test procedure described in paragraph
6.2. “Automatic components test”.
M O T O R S E A T
C Y C L E S : X X X X X X X X X
Change the value shown or press
ENTER to continue.
9.6.8. N
UMBER OF RELAY SWITCHING CYCLES TO MOVE THE SEAT MOTOR
UPWARD
This parameter does not appear for Abdominal Crunch and Lower Back.