Technogym BIOSTRENGTH LINE, Service Maintenance Manual

Page: 295 / 646

BIOSTRENGTH LINE: Service & Maintenance manual - rev. 2.1
Page 7.121
1. Remove the bearing
e .
2. Use a 3-gauge hexagonal T-wrench to
unscrew the 6 screws l .
3. Remove the pinion.
To replace the SECONDARY SHAFT and its
components, follow the above steps in reverse
order.
To reassemble the components of the
SECONDARY SHAFT, align the punch
on a tooth of the pinion with the hole in
the cam.
When the operation is complete, adjust
the alignment and tension of the
PRIMARY SHAFT-SECONDARY
SHAFT CHAIN as described in
paragraphs 8.11. and 8.12. .