Technogym BIOSTRENGTH LINE, Service Maintenance Manual

Page: 610 / 646

BIOSTRENGTH LINE: Service & Maintenance manual - rev. 2.1
Page 9.2
9.2.1. M
ACHINE CODE
This option allows you to set up the machine:
S E L E C T M A C H I N E
C O D E = X
The possible options are listed in the table below:
Machine Code
Abdominal Crunch 3
Lower Back 6
Leg Extension 2
Leg Curl 5
Vertical Traction 1
Shoulder Press 7
Chest Press 0
Rowing Torso 8
Leg Press 4
Enter the code for the machine on which you are working, then press “Enter” to continue or “Clear”
to abort.
Once the selection is made, the machine displays the name of the tool corresponding to the selected
code. For instance, if code 7 is selected--corresponding to the Shoulder Press--the following will
appear on the LCD:
S E L E C T E D M A C H I N E :
S H O U L D E R P R E S S B I O
The choice of the type of machine alters the procedures described in paragraphs:
•
9.2. “Configuring the technical parameters”;
•
9.3. “Configuring the user parameters”;
•
9.5. “Displaying working parameters”;
•
9.6. “Editing the working parameters”.
as it disables those options that are not pertinent to the type of machine: seat
information will not appear for the Abdominal Crunch and Lower Back.
9.2.2. O
FFSET ZERO SENSOR
This option allows you to set the SW offset of the zero sensor position. Correct positioning of the
zero sensor is essential in order to correctly select the weight stack plates as described in paragraph
8.1. “Adjusting the weight stack plate selection”:
O F F S E T > 1 0 0 0 U < 1 0 0 0 D
O
F F S E T = X X X X