Technogym BIOSTRENGTH LINE, Service Maintenance Manual

Page: 621 / 646

BIOSTRENGTH LINE: Service & Maintenance manual - rev. 2.1
Page 9.13
T I M E O U T 3 - 3 0 m i n .
T I
M E m i n . = 1 0
This value is factory-set to the recommended default value of 10 minutes.
If this parameter is set to 0, the machine will reset every 3 minutes and will not change
the seat position.
Enter the desired value, then press “Enter” to continue or “Clear” to abort.
9.3.7. S
ETTING THE DEFAULT SEAT POSITION
This parameter does not appear for Abdominal Crunch and Lower Back.
This option allows you to set the position that the seat will automatically move to at the end of the
automatic reset procedure:
S T A N D B Y S E A T
P O S I T I O N = X
These distances are factory-set to their recommended default value, as indicated in the table below:
Machine Position
Leg Extension 5
Leg Curl 5
Vertical Traction 5
Shoulder Press 5
Chest Press 5
Rowing Torso 0
Leg Press 0
Enter the desired value, then press “Enter” to continue or “Clear” to abort.
9.3.8. E
NABLE PACER
This option allows you to set pacer display to show the exercise completion speed:
P A C E R E N A B L E
N = 1 Y = 2 = X
The following options are available:
•
NO = 1;
•
YES = 2.
Select the desired option, then press “Enter” to continue or “Clear” to abort.