Technogym BIOSTRENGTH LINE, Service Maintenance Manual

Page: 363 / 646

BIOSTRENGTH LINE: Service & Maintenance manual - rev. 2.1
Page 7.189
7.5.18. D
ISASSEMBLING THE PULLEYS
Figure 7.5.18-1
Follow the steps described in paragraph 7.5.14.
“Disassembling the rear guard”.
For each PULLEY:
1. Unscrew the screw a and the nut b using 2
17-gauge wrenches.
2. Remove the PULLEY.
To reassemble the PULLEYS, follow the above
steps in reverse order.
For easier disassembly and reassembly
of the PULLEYS, it may be necessary to
loosen the cable tension.
When the operation is complete, adjust
the cable tension as described in
paragraph 8.4. .