Technogym BIOSTRENGTH LINE, Service Maintenance Manual

Page: 623 / 646

BIOSTRENGTH LINE: Service & Maintenance manual - rev. 2.1
Page 9.15
Select the desired option, then press “Enter” to continue or “Clear” to abort. If the NO option is
selected, the value of the parameters will be configured manually, as described in paragraph 9.2.
“Configuring the technical parameters”, while if the YES option is selected, the SW will ask you to
do 3 reps and, according on these reps the SW will automatically define the value of the parameters
ROM minimum length, default ROM start, default ROM length e %ROM first rep.
Then the procedure will end by displaying the following message:
E N D S E T U P M A C H I N E
P R O C E D U R E
After 3 seconds, the machine will then perform a reset procedure, during which the following will
appear on screen:
M A C H I N E R E S E T
P L E A S E W A I T . . .
When finished, the machine will return to stand-by mode.