Technogym BIOSTRENGTH LINE, Service Maintenance Manual

Page: 551 / 646

BIOSTRENGTH LINE: Service & Maintenance manual - rev. 2.1
Page 7.377
7.9.30. D
ISASSEMBLING THE SEAT MOTOR PHOTOCELL
Figure 7.9.30-1
1. Shut off the equipment and unplug the power
cord from the wall socket.
2. Unscrew the screw
a using a 3-gauge T-
wrench.
3. Remove the protective photocell cover b .
Figure 7.9.30-2
4. Disconnect the connector
c .
5. Use a small straight screwdriver to unscrew
the 2 screws d :
6. Remove the photocell board e .
When reassembling the photocell cover,
make sure the slot is aligned with the
cable passage.
To reassemble the SEAT MOTOR
PHOTOCELL, follow the above steps in reverse
order.