Technogym BIOSTRENGTH LINE, Service Maintenance Manual

Page: 382 / 646

BIOSTRENGTH LINE: Service & Maintenance manual - rev. 2.1
Page 7.208
7.5.36. D
ISASSEMBLING THE MATS
Figure 7.5.36-1
1. Shut off the equipment and unplug the power
cord from the wall socket.
For each side:
2. Use a large, flat screwdriver to release the 3
pressure fasteners A holding the LARGE
MAT against the frame.
3. Remove the LARGE MAT by pulling it
upward.
4. Use a large, flat screwdriver to release the 2
pressure fasteners B holding the CORNER
MAT against the frame.
5. Remove the CORNER MAT by pulling it
upward.
To reassemble the MATS, rest them on the frame
and press down at the fastening points.