Technogym BIOSTRENGTH LINE, Service Maintenance Manual

Page: 387 / 646

BIOSTRENGTH LINE: Service & Maintenance manual - rev. 2.1
Page 7.213
7.6.2. R
EMOVING THE ELECTRONIC DISPLAY BOARDS
Figure 7.6.2-1
Follow the steps described in paragraph 7.6.1.
“Disassembling the display”.
With the display resting on a bench:
To remove the CPU
a and LED b BOARDS:
1. Disconnect the connector
c from the
keyboard.
2. Disconnect the connector d from the
TLCBR.
3. Disconnect the connectors e from the LCD.
4. Use a small Philips screwdriver to unscrew
the 5 screws f .
5. Remove the CPU and LED BOARDS.
6. To separate the CPU and LED boards,
disconnect the 2 connectors and 4 coupling
elements.
When finished, configure the machine
parameters as described in paragraphs
9.2. and 9.3. .
To disassemble the TLCBR
g :
1. Disconnect the 2 connectors
h .
2. Use a medium-sized straight screwdriver to
unscrew the 3 holding screws i .
3. Remove the board.
To disassemble the KEY READER
l :
1. Disconnect the connector
m .
2. Use a medium-sized Philips screwdriver to
unscrew the 2 screws n .
3. Remove the connector block o .
4. Remove the KEY READER.
Continued on next page
→