Technogym BIOSTRENGTH LINE, Service Maintenance Manual

Page: 638 / 646

BIOSTRENGTH LINE: Service & Maintenance manual - rev. 2.1
Page 10.4
3. Make sure the weight stack bars are firmly fastened. Repair and/or replace any worn parts.
4. Clean the bars using alcohol.
5. Lubricate the bars and bushings of the plates and cross using BP ERGOL GHL68.
10.3.5. C
HECK THE ADDITIONAL WEIGHT
1. Make sure the additional weight slides smoothly. Repair and/or replace any worn parts.
2. Lubricate the sliding tracks using MOLYKOTE LONGTERM W 2.
10.3.6. C
HECK THE CABLES
1. Check the wear status of the machine cables, paying special attention to any hardened spots or
discoloration in the protective plastic of the cable.
2. Make sure the machine cables are firmly fastened to cams, pulleys and/or the ends connected to
ball joints.
3. Check the tension of the machine cables.
10.3.7. C
HECK THE MECHANISMS
1. Check the wear status of the machine mechanisms: lever arms, shafts, lever systems. Repair
and/or replace any worn parts.
2. Check the phasing of the machine mechanisms.
3. Lubricate the mechanisms using MOLYKOTE LONGTERM W 2.
10.3.8. C
HECK THE GAS SPRINGS
Perform this check on the Vertical Traction, Shoulder Press, Chest Press, Rowing Torso
and Leg Press.
1. Check the efficiency of the gas spring, making sure it sufficiently cushions the stem return to its
outward position.
2. Clean the stem using alcohol.
CAUTION: do NOT lubricate the gas spring stem for any reason.
10.3.9. C
HECK THE PULLEYS
1. Check the wear status of the pulley grooves. Repair and/or replace any worn parts.
10.3.10. C
HECK THE CAM GROUP
1. Check the wear status of the cam grooves. Repair and/or replace any worn parts.
2. Make sure all parts in the cam group are firmly tightened.
10.3.11. C
HECK THE PRIMARY AND SECONDARY SHAFT CONNECTION CHAIN
Perform this check on the Abdominal Crunch, Lower Back, Leg Extension and Leg
Curl.
1. Check the wear status of the chain. Repair and/or replace any worn parts.
2. Check the alignment and tension of the chain.