Technogym BIOSTRENGTH LINE, Service Maintenance Manual

Page: 617 / 646

BIOSTRENGTH LINE: Service & Maintenance manual - rev. 2.1
Page 9.9
Machine Cm
Abdominal Crunch 8
Lower Back 10
Leg Extension 30
Leg Curl 30
Vertical Traction 30
Shoulder Press 30
Chest Press 30
Rowing Torso 50
Leg Press 16
Enter the desired value, then press “Enter” to continue or “Clear” to abort.
9.2.14. %ROM
FIRST REP
This option allows you to set the value in cm of the parameter “%ROM first rep” ; for a description
of this parameter, see paragraph 11.1. “Configuration parameters for exercise ROM acquisition”:
% R O M F I R S T R E P
% = X X
These distances are factory-set as indicated in the table below:
Machine %
Abdominal Crunch 45
Lower Back 45
Leg Extension 45
Leg Curl 45
Vertical Traction 45
Shoulder Press 45
Chest Press 74
Rowing Torso 55
Leg Press 45
Enter the desired value, then press “Enter” to continue or “Clear” to abort.
Then the procedure will end by displaying the following message:
E N D S E T U P M A C H I N E
P R O C E D U R E
After 3 seconds, the machine will then move the weight stack motor until the selection brush is
aligned with the top gear, to assist its replacement, and will move the seat into position 9. In this
case, the following will appear on the display:
P R E S S E N T E R T O
C O N T I N U E