Technogym BIOSTRENGTH LINE, Service Maintenance Manual

Page: 566 / 646

BIOSTRENGTH LINE: Service & Maintenance manual - rev. 2.1
Page 7.392
7.9.42. D
ISASSEMBLING THE LEVER CABLE
Figure 7.9.42-1
Follow the steps described in paragraphs 7.9.38.
“Disassembling the tachogenerator guard” and
7.9.39. “Disassembling the front guard”.
For each side:
1. Unscrew the 3 dowels
a , using a 4-gauge
hexagonal T-wrench.
2. Remove the cable with the aid of a pair of
pliers.
3. Remove the cable from the pulleys.
To unscrew the joints:
4. Unscrew the screw
b , holding the nut c in
place with 2 17-gauge wrenches.
5. Remove the joints.
To reassemble the LEVER CABLE, follow the
above steps in reverse order.
When the operation is complete, adjust
the LEVER CABLE tension as
described in paragraph 8.6. .