Technogym BIOSTRENGTH LINE, Service Maintenance Manual

Page: 238 / 646

BIOSTRENGTH LINE: Service & Maintenance manual - rev. 2.1
Page 7.64
7.2.22. D
ISASSEMBLING THE SEAT GUARD
Figure 7.2.22-1
1. Shut off the equipment and unplug the power
cord from the wall socket.
2. Use a medium-sized Philips screwdriver to
unscrew the 4 screws a .
3. Remove the REAR SEAT GUARD.
Figure 7.2.22-2
4. Loosen the 2 screws b using a medium-sized
Philips screwdriver.
5. Release the FRONT SEAT GUARD from
the loose 2 screws by first pushing it back,
then upward.
6. Spread the sides slightly and slide out the
FRONT SEAT GUARD .
To reassemble the SEAT GUARDS, follow the
above steps in reverse order