Suzuki SWIFT RS415 2017, Service Manual

Page: 810 / 1257

6C-37 Power Assisted Steering System:
Specifications
Tightening Torque Specifications
S4RS0A6307001
NOTE:
The specified tightening torque is also described in the following.
“Steering Gear Case Assembly Components: ”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Fasteners Information: in Section 0A”.
Fastening part
Tightening torque
Note
N
˜
m kg-m lb-ft
Tie-rod end nut 45 4.5 32.5 ) / )
Tie-rod end lock nut 45 4.5 32.5 ) / )
Wheel bolt 85 8.5 61.5 ) / )
Steering gear case mounting No.1 bolt 55 5.5 40.0 )
Steering gear case mounting No.3 bolt 40 4.0 29.0 )
Engine rear mounting bracket bolt 55 5.5 40 )
Steering shaft joint bolt 25 2.5 18.5 )
Tie-rod 93 9.3 67.5 )
Rack damper screw Tighten 25 N
˜
m (2.5 kg-m, 18.0 lb-ft) and
loosen 180
q
and then tighten 3.9 N
˜
m (0.39
kg-m, 3.0 lb-ft) and turn it back by 10
q
or
less by the specified procedure.
)
Rotation torquer of pinion 2.0 0.2 1.5 )
Rack damper screw lock nut 64 6.4 46.5 )
P/S control module mounting bolt 9 0.9 6.5 )