Suzuki SWIFT RS415 2017, Service Manual

Page: 433 / 1257

Rear Suspension: 2C-3
Repair Instructions
Rear Shock Absorber Removal and Installation
S4RS0A2306028
Removal
1) Hoist vehicle.
2) Remove tail end member trim (1) and quarter inner
trim (2).
3) Support rear axle by using floor jack to prevent it
from lowering.
4) Remove absorber lower nut.
5) Remove absorber upper nut. Then remove shock
absorber.
Installation
1) Install shock absorber (1).
Tighten new rear shock absorber upper nut and
lower nut temporarily at this step.
CAUTION:
Never reuse the removed rear shock
absorber upper nut.
2) Remove floor jack (2) from rear axle and lower hoist.
3) Tighten nuts to specified torque.
Tightening torque
Rear shock absorber upper nut (a): 25 N·m (2.5
kg-m, 18.0 lb-ft)
Rear shock absorber lower nut (b): 90 N·m (9.0
kg-m, 65.0 lb-ft)
4) Install tail end member trim (1) and quarter inner trim
(2).
3. Clip
3
3
2
3
1
3
I4RS0A230003-
3. Clip
(a)
1
(b)
2
I4RS0A230004-
3
3
2
3
1
3
I4RS0A230003-