Suzuki SWIFT RS415 2017, Service Manual

Page: 1137 / 1257

Glass / Windows / Mirrors: 9E-3
Power Door Mirror Control System (If Equipped) Symptom Diagnosis
S4RS0A9504003
Repair Instructions
Windshield Removal and Installation
S4RS0A9506001
Removal
1) Clean both inside and outside of glass and around it.
2) Remove wiper arms and cowl top garnish.
3) Remove windshield side garnish.
4) Using tape, cover body surface around glass to
prevent any damage.
5) Remove rear view mirror, sun visor and front pillar
trims (right & left).
6) If necessary, remove instrument panel. Refer to
“Instrument Panel Removal and Installation: in
Section 9C”.
7) If necessary, remove head lining. Refer to “Head
Lining Removal and Installation: in Section 9H”.
8) Remove (or cut) windshield molding.
9) Drill hole with eyeleteer (1) through adhesive and let
piano string through it.
10) Cut adhesive all around windshield (1) with piano
string (2). When using tool, windshield knife (3), to
cut adhesive, be careful not to cause damage to
windshield. Use wire to cut adhesive along lower
part of windshield.
NOTE:
Use piano string (2) as close to glass as
possible so as to prevent damage to body
and instrument panel.
11) Using knife (1), smoothen adhesive (2) remaining on
body side (3) so that it is 1 – 2 mm (0.039 – 0.078
in.) thick all around.
Condition Possible cause Correction / Reference Item
All power mirrors do not
operate Circuit fuse blown Replace fuse and check for short circuit.
Power door mirror switch faulty Check power door mirror switch referring to
“Power Door Mirror Switch Inspection: ”.
Wiring or grounding faulty Repair circuit.
One power mirror does
not operate Power door mirror switch faulty Check power door mirror switch referring to
“Power Door Mirror Switch Inspection: ”.
Power door mirror actuator faulty Check actuator refraining to “Power Door
Mirror Actuator Inspection: ”.
Wiring or grounding faulty Repair circuit.
I2RH01950040-
I3RH0A950006-